4,696 research outputs found
Development and demonstration of a renewable energy based demand/supply decision support tool for the building design profession
Future cities are likely to be characterised by a greater level of renewable energy systems deployment. Maximum impact will be achieved when such systems are used to offset local energy demands in contrast to current philosophy dictating the grid connection of large schemes. This paper reports on the development of a software tool, MERIT, for demand/ supply matching. The purpose of MERIT is to assist with the deployment of renewable energy systems at all scales. This paper describes the procedures used to match heterogeneous supply technologies to a set of demand profiles corresponding to the different possible fuel types
Development of a simulation-based decision support tool for renewable energy integration and demand-supply matching
This paper describes a simulation-based decision support tool, MERIT, which has been developed to assist in the assessment of renewable energy systems by focusing on the degree of match achievable between energy demand and supply. Models are described for the prediction of the performance of PV, wind and battery technologies. These models are based on manufacturers' specifications, location-related parameters and hourly weather data. The means of appraising the quality of match is outlined and examples are given of the application of the tool at the individual building and community levels
Singularity-Free Electrodynamics for Point Charges and Dipoles: Classical Model for Electron Self-Energy and Spin
It is shown how point charges and point dipoles with finite self-energies can
be accomodated into classical electrodynamics. The key idea is the introduction
of constitutive relations for the electromagnetic vacuum, which actually
mirrors the physical reality of vacuum polarization. Our results reduce to
conventional electrodynamics for scales large compared to the classical
electron radius cm. A classical simulation for a
structureless electron is proposed, with the appropriate values of mass, spin
and magnetic moment.Comment: 3 page
Transient behavior of surface plasmon polaritons scattered at a subwavelength groove
We present a numerical study and analytical model of the optical near-field
diffracted in the vicinity of subwavelength grooves milled in silver surfaces.
The Green's tensor approach permits computation of the phase and amplitude
dependence of the diffracted wave as a function of the groove geometry. It is
shown that the field diffracted along the interface by the groove is equivalent
to replacing the groove by an oscillating dipolar line source. An analytic
expression is derived from the Green's function formalism, that reproduces well
the asymptotic surface plasmon polariton (SPP) wave as well as the transient
surface wave in the near-zone close to the groove. The agreement between this
model and the full simulation is very good, showing that the transient
"near-zone" regime does not depend on the precise shape of the groove. Finally,
it is shown that a composite diffractive evanescent wave model that includes
the asymptotic SPP can describe the wavelength evolution in this transient
near-zone. Such a semi-analytical model may be useful for the design and
optimization of more elaborate photonic circuits whose behavior in large part
will be controlled by surface waves.Comment: 12 pages, 10 figure
Merit - An evaluation tool for 100% renewable energy provision
Islands represent an interesting challenge in terms of energy supply. A great deal of work has been carried out to look at specific aspects of this issue on different islands. Unfortunately, results from one study cannot be easily applied to other islands due to island-specific resources and energy-use profiles. A quantitative evaluation tool (MERIT) is presented here, which is able to match half-hourly energy demands (heat, electricity, hot water and transport) with local supplies. The program examines the energy balance on any scale, from an individual building through to an entire country, thereby providing a powerful and generic aid to decision making. This paper demonstrates the generality and usefulness of MERIT by using it to analyse the options for creating an energy-autonomous community on a typical, small island off the west coast of Scotland. Results are presented showing the feasibility of accomplishing 100% renewable provision on this island using available local resources
A liquid crystal analogue of the cosmic string
We consider the propagation of light in a anisotropic medium with a
topological line defect in the realm of geometrical optics. It is shown that
the effective geometry perceived by light propagating in such medium is that of
a spacial section of the cosmic string spacetime.Comment: 3 pages, 2 figures. Modern Physics Letters A, accepted for
publicatio
A technique for optimal temperature estimation for modeling sunrise/sunset thermal snap disturbance torque
A predictive temperature estimation technique which can be used to drive a model of the Sunrise/Sunset thermal 'snap' disturbance torque experienced by low Earth orbiting spacecraft is described. The twice per orbit impulsive disturbance torque is attributed to vehicle passage in and out of the Earth's shadow cone (umbra), during which large flexible appendages undergo rapidly changing thermal conditions. Flexible members, in particular solar arrays, experience rapid cooling during umbra entrance (Sunset) and rapid heating during exit (Sunrise). The thermal 'snap' phenomena has been observed during normal on-orbit operations of both the LANDSAT-4 satellite and the Communications Technology Satellite (CTS). Thermal 'snap' has also been predicted to be a dominant source of error for the TOPEX satellite. The fundamental equations used to model the Sunrise/Sunset thermal 'snap' disturbance torque for a typical solar array like structure will be described. For this derivation the array is assumed to be a thin, cantilevered beam. The time varying thermal gradient is shown to be the driving force behind predicting the thermal 'snap' disturbance torque and therefore motivates the need for accurate estimates of temperature. The development of a technique to optimally estimate appendage surface temperature is highlighted. The objective analysis method used is structured on the Gauss-Markov Theorem and provides an optimal temperature estimate at a prescribed location given data from a distributed thermal sensor network. The optimally estimated surface temperatures could then be used to compute the thermal gradient across the body. The estimation technique is demonstrated using a typical satellite solar array
Evolving wormhole geometries within nonlinear electrodynamics
In this work, we explore the possibility of evolving (2+1) and
(3+1)-dimensional wormhole spacetimes, conformally related to the respective
static geometries, within the context of nonlinear electrodynamics. For the
(3+1)-dimensional spacetime, it is found that the Einstein field equation
imposes a contracting wormhole solution and the obedience of the weak energy
condition. Nevertheless, in the presence of an electric field, the latter
presents a singularity at the throat, however, for a pure magnetic field the
solution is regular. For the (2+1)-dimensional case, it is also found that the
physical fields are singular at the throat. Thus, taking into account the
principle of finiteness, which states that a satisfactory theory should avoid
physical quantities becoming infinite, one may rule out evolving
(3+1)-dimensional wormhole solutions, in the presence of an electric field, and
the (2+1)-dimensional case coupled to nonlinear electrodynamics.Comment: 17 pages, 1 figure; to appear in Classical and Quantum Gravity. V2:
minor corrections, including a referenc
(Never) Mind your p's and q's: Von Neumann versus Jordan on the Foundations of Quantum Theory
In two papers entitled "On a new foundation [Neue Begr\"undung] of quantum
mechanics," Pascual Jordan (1927b,g) presented his version of what came to be
known as the Dirac-Jordan statistical transformation theory. As an alternative
that avoids the mathematical difficulties facing the approach of Jordan and
Paul A. M. Dirac (1927), John von Neumann (1927a) developed the modern Hilbert
space formalism of quantum mechanics. In this paper, we focus on Jordan and von
Neumann. Central to the formalisms of both are expressions for conditional
probabilities of finding some value for one quantity given the value of
another. Beyond that Jordan and von Neumann had very different views about the
appropriate formulation of problems in quantum mechanics. For Jordan, unable to
let go of the analogy to classical mechanics, the solution of such problems
required the identication of sets of canonically conjugate variables, i.e., p's
and q's. For von Neumann, not constrained by the analogy to classical
mechanics, it required only the identication of a maximal set of commuting
operators with simultaneous eigenstates. He had no need for p's and q's. Jordan
and von Neumann also stated the characteristic new rules for probabilities in
quantum mechanics somewhat differently. Jordan (1927b) was the first to state
those rules in full generality. Von Neumann (1927a) rephrased them and, in a
subsequent paper (von Neumann, 1927b), sought to derive them from more basic
considerations. In this paper we reconstruct the central arguments of these
1927 papers by Jordan and von Neumann and of a paper on Jordan's approach by
Hilbert, von Neumann, and Nordheim (1928). We highlight those elements in these
papers that bring out the gradual loosening of the ties between the new quantum
formalism and classical mechanics.Comment: New version. The main difference with the old version is that the
introduction has been rewritten. Sec. 1 (pp. 2-12) in the old version has
been replaced by Secs. 1.1-1.4 (pp. 2-31) in the new version. The paper has
been accepted for publication in European Physical Journal
Quantum measurement of the degree of polarization of a light beam
We demonstrate a coherent quantum measurement for the determination of the
degree of polarization (DOP). This method allows to measure the DOP in the
presence of fast polarization state fluctuations, difficult to achieve with the
typically used polarimetric technique. A good precision of the DOP measurements
is obtained using 8 type II nonlinear crystals assembled for spatial walk-off
compensation.Comment: 4 pages, 3 figure
- âŠ